lidl satellite dish installation photos

I have received a few comments from people who have read my earlier article on installing the lidl satellite dish.
Its very important that the arm holding the lnb is horizontal as can be seen in the picture below. (Click on image for a larger version)

Another problem you may run into is that the mounting bracket may be installed upside down. This does not cause any immediate probelms but does mean the dish can move in very high winds.
The image below is a close up of the mounting bracket. Two things worth noting are the ground symbol in the top right hand side of the image and the fact that the angle of the dish is 22 – 23 degrees approx (There is a very small pointer on the bracket, this is located on the bottom left hand part of the bracket)
I orginally had the bracket the other way round and was having to adjust the dish as it would move. Since I reinstalled the bracket the right way round there has been no movement.

Previous article on this topic
Aligning free to air satellite dishes


  1. Conor says:

    Have a Lidl dish & system myself – the only issue I had with it was it moved in the wind, causing signals to be garbled or lost. I reversed the bracket as you did even though it looks wrong and contrary to the manual and it reduced loss a great deal. I also note this part of the system has rusted already.
    Thanks for the wisdom on your web blog…

  2. Paula says:

    Hi there, we bought satelite in slovakia and would like to instale it and get it going to astra 3 but there is no way how we can do it we are looking for help to set it up any advice please? my phone number is 086 3085588 the make of satelite is cristorx3-s (plus slovakian smart card skylink)

Leave a Reply

Your email address will not be published. Required fields are marked *